We have reached the requisite days since our first Spring Dead Spot (SDS) application to make our second, which was applied today.
The key driver for both applications is soil temperatures.
The trigger is when the soil temperature drops below 65 degrees for 5
consecutive days. This year, that happened for us at the end of September. Once
the first application is made, the second needs to follow 21-28 days later
depending on the soil temperature trends. If the soils warm back up and stay
warm, then we would aim for the 28-day interval. However, if the soils continue
to cool down more or stay close to or just below their mark from the first
application, then we would apply closer to the 21-day interval or just after. Either
way, we don’t want the second application to extend beyond the 28-day interval,
or the fungus population can climb back too high for adequate control.
Despite the record warmth we had for a couple of days last
week, the soil temperatures only spiked slightly, and now with the cold
weekend, they have dropped back down well into range for the second SDS
application. The application itself takes 10-12 hours total so it can’t just be
squeezed into any day. So, contending with regular use of the golf course,
along with outings and other events, makes planning and execution very
difficult and leave us with only a few options. Today fit within our timing
interval and we were able to find a Monday without anything else happening so
everything aligned.
Regardless of the challenges and difficulty, these two
applications are the most important ones that will be made to the Bermuda grass
all year. Fitting them in and making sure they are done correctly is paramount.
Starting in November, through February, we will reduce to 1
post per month. Thank you
Etiquette Reminder of the Month
If you drive your motorized cart into a bunker, please rake the tracks. Thank you
Also, as part of a Golf Committee initiative to improve
course etiquette, we have included links to videos teaching proper on course
etiquette. Please take a moment to watch:
Ball
Marks - How to properly repair
See you on the course!
Joe
jvillegas@bwrc.org

No comments:
Post a Comment
Have a question or comment? Share it with Joe!